Sega Triforce Dip Switch Settings
Since it took some digging for me to find these, may you will find this useful Triforce: Dip 1: Not Used Dip 2: Not Used Dip 3: Not Used Dip 4: On = Vertical, Off = Horizontal Dip 5: On = C-Sync, Off = H,V Sync Dip 6: On = 31KHz, Off = 15KHz Triforce: […]
Peter Chou IMP-44-1040 or USP-11-150x Power Supply Rebuild
I picked up a Neo Geo 4 slot at the request of a friend (lets call it a commission work, I guess?). It had a power supply in it that was rusty and dirty and loud as can be. It was this model: Now, you can just go get a replacement for this, and thats […]
Sun JVS Power Supply Rebuild
So we use these Sun power supplies to power our naomis and whatnot, because they’re nice, usually pinned correctly, and have an adjustable 3.3v rail. Thats all well and good, and if you want them to last forever, you can recap them, just like you would anything else. I looked around at the internet, and […]
Pump it Up CX Modifications: Part 1
Just got back from Ohio, where I picked up another Pump it Up machine, this time, for keeps! Its a Japanese CX model, which is the same as the international model, but about a foot shorter in the header. Its interesting to open these pads up, since I’ve never messed with this newer version, and […]
Still working, just on other stuff!
I’ve been live streaming on Facebook, and recreating winbigarcade.com as an online store for arcade stuff. Quincy is still here, and I don’t know that I’ll get to post this “Fostering Quincy” post that has been in drafting for 1.5 years!
Korean DDR Pad Connector
In case you wondered…
Self Driving Uber!!
Nick and I are in Pittsburgh for a convention, and we hailed an Uber last night, and were informed that we were going to be driven in a self-driving car. I could have died, I was so excited. I had all expectations of a car rolling up and us getting in, but it was “operated”. […]
2/27 Arcade work!
Laura and I started putting the decals on Mortal Combat, and they look GREAT if I’m honest. I ordered custom drilled plexi, and its not perfectly square, so thats an issue. The T-mold is also a little goofy on the control panel but that should turn out ~ok~. Otherwise, America’s Army is working with mame, […]
Andamiro MK9 hardware revision
Motherboard – ASRock G41C-GS Processor – Compatible Memory – 2GB, compatible Video Card – Nvidia GT210
1/27 Arcade Work Update
MvC2 WORKS! I need to repaint the control panel and figure out the size of bolts for candy panels… I’ve got a guy working on a marquee, I hope! CvS needs its pins crimped, but we’re almost there too! Mortal Bishi Bashi Kombat is a dream differed. I can’t get the software to install at […]